Complete kit to modify the halogen projectors found in the aftermarket replica lights.
- Evox-r projectors. (Ready to Install option includes necessary drilling and hardware for a direct ready to install fit)
- Full D2S 35w or 50w Morimoto HID kit with D2S bulbs with your choice of color output. (Includes pre installed 3m VBT Mounting tape)
- H13 Bi-xenon wire harness for a plug and play install.
- New Rubber Housing Caps with zip ties. (These are modified and custom fitted with our Ready to Install Option)
- New Butyl Rubber for re-sealing.
Existing Lens Etching Options can be found HERE
Switchback: The Profile Pivot Switchback Halos are designed to run full-time in their bright white setting, and [when signaled to do so by your turn signal circuit] flash amber. When the signal stops, these halo LED lights will automatically return to white just like any modern luxury car would. They can also be wired for use as a bright Amber-only or White-only halo if that's what you want. Just wire up the appropriate input(s) and you're ready to roll!
RGB: Unlike competing RGB "systems" that require complicated wiring from the user's side, all Prism LED setups are 100% Plug n Play. There is no wire stripping, cutting, or splicing involved within the kit. All wiring is insulated by rubber tubing then protected with TechFlex mesh for an OEM-like appearance, durability, and abrasion resistance. The LED drivers are housed inside an aluminum housing that's been anodized with an attractive piano black finish and laser engraved with the Profile Prism graphics. Make sure your setup looks good inside and out!
Ready to Install option can be installed with just basic hand tools. No additional or special tools necessary for install. Heat gun or oven is necessary to open the lights.